Pocketwizard PowerST4 Receiver for Elinchrom


or 4 payments of $47.25 with Info

Pick-up from the store - $0.00
Please wait for our phone call to confirm pick up details, thanks. Pick up address: Shop 3, 637 Princes Highway, Blakehurst, NSW 2221.
  • Adjust Settings From Camera Position
  • Auto or Manual ISO & Aperture Control
  • Up to 20 ControlTL Channels Possible
  • Compatible With Any PocketWizard Radio
  • Plug Into Elinchrom Flash Remote Socket
  • Programmable and Upgradeable
  • No Batteries Required
  • HyperSync Up to 1/8000s Possible
  • MiniTT1 Trans or FlexTT5 Trans Required


The PowerST4 Receiver enables remote power control with select Elinchrom RX flashes using PocketWizard ControlTL technology. 

With a MiniTT1 Transmitter or FlexTT5 Transceiver on your camera and a PowerST4 plugged into your Elinchrom flash, you can adjust the flash power settings directly from the camera. 

Add the AC3 ZoneController and you can control three different zones of lights in 1/3-stop increments with up to a six-stop range. Utilize PocketWizard’s unique features such as HyperSync and Optimized Rear Curtain Sync for maximum control of your lighting.




PocketWizard’s new firmware platform taps into the full potential of your camera and flash system enabling an entirely new level of remote flash capability through our proven radio communications.  ControlTL firmware is configurable and upgradeable for “future-proof” continuous improvement.

Manual Power Control

When the PowerST4 is paired with either the MiniTT1 or FlexTT5 on camera, you can adjust the power settings of your Elinchrom RX lights from the camera’s position either with the Flash Exposure Compensation dial or add the AC3 ZoneController for three zones of power control.


Use either the AC3 ZoneController or a MultiMAX radio to control up to three zones of light with as many lights in each zone as you want.  Use the A-B-C zone switch on the PowerST4 to assign the zone.


In Auto Mode, change ISO, aperture, or FEC and the lights automatically adjust their compensating power setting with PocketWizard PowerTracking.  Set your AC3 ZoneController to manual and PowerTracking is turned off for absolute manual control.  PowerTracking can be customized via the PocketWizard Utility.


HyperSync allows photographers to achieve faster X-sync speeds, all the way up to 1/8000 second*, will full power flash.  Now you can cut the ambient light and use wide-open apertures, outdoors in bright sunlight.  That extra speed can also freeze action, whether shooting models or athletes in motion. (*camera and flash model dependent).

HyperSync Automation

With ControTL Firmware updates to the MiniTT1 and FlexTT5 for Canon (6.0) and Nikon (3.0) and firmware update 5.1 for the PowerST4, adjusting HyperSync has now been automated.  HyperSync can now be adjusted in two seperate places - – on the transmitter and on the receiving ControlTL radio. The transmitting or on-camera MiniTT1 or FlexTT5 automatically adjusts HyperSync to compensate for changes made to shutter speed. Photographers can further refine HyperSync via the PocketWizard Utility. Please visit wiki.pocketwizard.com/HyperSync to learn more about configuring HyperSync with a PowerST4. 

Programmable and Upgradeable

Use the PocketWizard Utility with the PowerST4’s USB port to program the receiver to any PocketWizard channel and zone.  You can also program your initial power settings, modeling light settings and beeper settings using the Utility.  The PowerST4 can be easily upgraded whenever updates and feature enhancements are available.
Channels/Learn Mode

The PowerST4 can be programmed as needed with up to 20 ControlTL channels for Manual Power Control, or 32 standard channels for simple triggering.  Channels can be configured with the PocketWizard Utility, the Learn function from another PocketWizard radio, or the reset function to configure back to factory settings.

Reverse Compatible

The PowerST4 Receiver operates on the same channels as all other PocketWizard radios and will work with any PocketWizard radio you may already have.

Low-Profile Design

The PowerST4 is tiny and simply plugs into the remote socket on an Elinchrom RX flash.  Note: Ranger RX requires EL-19374 EL Skyport Transceiver RX Adapter.

No batteries required

The PowerST4 gets its power from the flash. 


SKU 4586371299428
Brand PocketWizard
Shipping Weight 0.2000kg
Shipping Width 0.030m
Shipping Height 0.030m
Shipping Length 0.030m

Be The First To Review This Product!

Help other M & C Co Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category

Godox TTL Wireless Flash Receiver only X1 (X1C/N-R)

Godox TTL Wireless Flash Receiver only X1 (X1C/N-R

From $99.00

Make 4 interest-free payments of $24.75 fortnightly and receive your order now.

See Options
Elinchrom Skyport Transmitter Plus HS for Nikon

Elinchrom Skyport Transmitter Plus HS for Nikon


Make 4 interest-free payments of $88.75 fortnightly and receive your order now.

Pocketwizard FlexTT5 Transceiver for Nikon 433MHz

Pocketwizard FlexTT5 Transceiver for Nikon 433MHz


Make 4 interest-free payments of $79.99 fortnightly and receive your order now.

Receiver STRATO II 5in1 Receiver Only

Receiver STRATO II 5in1 Receiver Only

From $86.00

Make 4 interest-free payments of $21.50 fortnightly and receive your order now.

See Options