Image 1

Pocketwizard FlexTT5 Transceiver for Panasonic 433MHz


or make 4 interest-free payments of fortnightly with Afterpay More info

  • Product Description


    Use the FlexTT5 Transceiver to control single or multiple off-camera Lumix Speedlites.

    You can now place TTL or manual flashes anywhere to illuminate the scene: Around corners, out-of-sight and in bright sunlight. The FlexTT5 is compatible with any PocketWizard radio for triggering manual flash or remote cameras.



    • Manual Power Control
    • HSS
    • HyperSync®
    • Auto-Sensing Transceiver Technology
    • Auto-Relay Mode
    • Camera/Flash Ports

    Manual Power Control
    Remotely adjust the manual power settings of your flashes in up to three zones (groups). You can have as many flashes in each group as you want.

    Get more light, faster recycling times and more shots per battery with Panasonic’s High Speed Sync (HSS) mode, optimized by PocketWizard’s ControlTL technology. Now you can take advantage of this great feature and shoot wide open in full sun with remote speedlights.

    HyperSync allows photographers to achieve faster X-sync speeds with full power flash. Now you can cut the ambient light and use wide-open apertures outdoors in bright sunlight. That extra speed can also freeze action, whether shooting models or athletes in motion.
    *Every camera/flash system performance will be different.

    PocketWizard Compatible
    Works with all PocketWizard radios on the same frequency including PocketWizard OEM Partner products like Sekonic meters and Profoto, Bowens, Calumet, Dynalite, Lumedyne, Norman and Photogenic flash packs for standard triggering and HyperSync.

    PocketWizard Utility
    Using a standard USB connection and the free PocketWizard Utility, you can easily configure your channel settings, dial in your HyperSync timing, adjust your sleep-mode timers and update your product to the latest firmware virtually making FlexTT5 radios “Future Proof”.

    Auto-Sensing Transceiver Technology
    PocketWizard’s Auto-Sensing Transceiver Technology enables the FlexTT5 Transceiver to switch between transmit mode and receive mode automatically for greater flexibility on the job.

    Auto-Relay Mode
    Easily trigger a remote camera in sync with a remote flash with Auto-Relay Mode. Put a camera where you can’t be and use either remote TTL or non-TTL lighting or both at the same time.

    Use your Panasonic camera’s flash menus to control the power of up to 3 Groups (zones) of light.

    Camera/Flash Ports
    The FlexTT5 Transceiver has two plug-in ports for use with remote cameras and other flash packs. With its Auto-Relay Mode, the FlexTT5 can trigger a remote camera and transmit to a remote flash at the same time. 


    TTL Compatibility:

    Panasonic TTL compatible - Visit for updated compatibility list


    340.00 - 354.00 MHz US FCC / IC
    433.42 - 434.42 MHz CE


    52 Channels over 26 Frequencies (FCC/IC)
    35 Channels over 5 Frequencies (CE)


    2.7" (6.9 cm) rubberized with 180 degree swing

    Transmit output power:

    Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)

    Range Performance:

    Comparable to other PocketWizard radios (Actual range is dependent on multiple factors including equipment, mode, environment, positioning,
    orientation and interference)



    Hot Shoe, 1/4-20, lanyard, velcro

    Maximum Shooting Rate  Frames per second (fps)

    TTL Mode:  within 1 FPS of camera's maximum FPS
    * dependent on flash power settings  
    FPS = Frames Per Second

    Power / Channel Switch

    OFF - C.2 - C.1

    Zone Select Switch

    A-B-C (matches Panasonic Groups/Zones)

    Status Indicator

    LED: Green, Amber, Red status indications

    Camera / P1 Port

    1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering.  Port Voltage Handling: up to 50 Volts, 100 milliamp continuous
    Tip = Trigger
    Ring = Pre-Trigger
    Sleeve = Ground
    Note: for camera triggering only.  Do not connect a flash to this port.

    Flash / P2 Port

    1/8" (3.5 mm) mono miniphone.  Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized

    Minimum Receive Contact Time

    Camera / P1 Port = 80 milliseconds

     Flash / P2 Port = 500 milliseconds

    Voltage Present

    3.3 VDC (all pins) - safe for all cameras

    Hot Shoe voltage protection:

    Hot Shoe: up to 50 Volts


    USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground

    Operating Temperature

    Above -15° C (5° F) and below 50° C (120° F).

    Storage Temperature (without battery)

    Above -30 C (-22 F) and below 85 C (185 F)


    High impact plastic, captive battery door
    Hot Shoe made of glass reinforced resin


    Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB

    Battery Life

    30 + Hours 


    3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered


    5.4 oz (153 grams) 3.8 oz (108 grams) without batteries

    Included in the box

    FlexTT5 Transceiver, USB cable, Two (2) AA batteries

    ROHS Compliant


  • Product Reviews


    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review