BENRO VIDEO TRIPOD KIT ALUMINIUM BV10
The Benro BV10 tripod kit supports up to 10kg/ 22.05 lbs. making it a perfect match for studio applications and larger video cameras. All of the main controls, other than counterbalance, are located on the left side of the head making it easy to make adjustments with a single hand while operating the camera.
The 5- step counterbalance (steps 0-4) allows you to dial in the correct amount of counterbalance for your set-up. The 4 step pan & tilt movements make sure your movements are smooth and steady. One 3/8" accessory mount come in handy when needing to add a simple audio recorder or monitor. For added versatility, the tie down stud is removable to convert the BV10 head to flat base mode for mounting to a slider. Excellent stability is achieved with the integrated 100mm metal ball. The eighth generation two stage aluminum tripod is a double tandem leg design that uses an adjustable, removable spreader, a metal 100mm bowl, oversized quick positive leg locks and dual spike feet with pads, making this kit perfect for heavy loads, ideal for supporting jibs and fully rigged cameras.
The 501/504PL/Ace compatible sliding quick release plate makes it easy to set the balance point of your camera gear, quickly and precisely.
The heads incorporate a 3/8" accessory mount, perfect for mounting a simple audio recorder or monitor. For added versatility, the tie down stud is removable to convert the BV10 or BV8 to flat base mode for mounting to a slider.
The floor spreader adds extra built-in stability.
The tripod height can easily be set by a twist of the quick lock leg levers, which combined with the antirotation legs enable fast and fumble free set-up.
The BV10 and BV8 have a 4-step pan and 4-step tilt drag for independent control over each movement, to ensure your movements are smooth and steady.
Both the pan lock and the tilt lock can be turned on or off independently and are located on the operator side of the head for easy control. Tile range for the BV10 is +90 / -65 (Stepped 0-5 Fluid Cartridge Balance)
A heavy duty case with backpack straps is included for handy transport and protection of the tripod and head
Excellent stability is achieved with the eighth generation two stage aluminium tripod. The double tandem leg design uses and adjustable, removable spreader, a metal 100mm bowl, oversized quick positive leg locks and dual spike feet with pads, making this kit perfect for heavy loads and rigged cameras.
MAXIMUM LOAD | 22.05 lb (10 kg) |
MAX HEIGHT (24° LEG ANGLE) W/COLUMN EXTENDED | 64.4 in (163.5 cm) |
MINIMUM HEIGHT | 29.13 in (74 cm) |
MAXIMUM HEIGHT | 64.6 in (163.5 cm) |
FOLDED LENGTH | 34.6 in (88 cm) |
NUMBER OF LEG SECTIONS | 4 |
LEG LOCK TYPE | Twist Lever Lock |
INDEPENDENT LEG SPREAD | ML08 Mid-Level Spreader |
TILT RANGE | +90 / -65 (Stepped 0-5 Fluid Cartridge Balance) |
QUICK RELEASE (QR) PLATE | Slide-in Video (QR10) 1/4-20 & 3/8 |
HEAD MOUNT THREAD SIZE | 100mm Bowl |
WEIGHT | 16.05 lb (7.28 kg) |
PACKAGE INCLUDES:
Video Tripod, Video Head, QR Plate, Mid Level Spreader, Deluxe Carry Case, Strap, Rubber Feet & Tools
(3675481456454)
SKU | 3675481456454 |
Barcode # | 3675481456454 |
Brand | Benro |
Shipping Weight | 10.0000kg |
Shipping Width | 0.250m |
Shipping Height | 0.250m |
Shipping Length | 1.000m |
Shipping Cubic | 0.062500000m3 |
BV10 Review
By: Brandon on 1 February 2018I have set it up and placed Video Camera on the tripod. I like it's operation in Tilt and Pan and movement and has plenty of counter balance. Tilt and Pan lock work great. It is very tall fully extended, so will be using with bottom legs not fully extended, to match my high at 6.1 Over it seem really sturdy, it's a little heavy but that is my fault, as I did not want to spend $2000 for another Tripod. The Plate some come with it is long and perfect with 3/8 and 1/4 screw for video camera. I have given it a 4 as I don't like the Locking Pin to secure the Base Plate, it's work fine and locks plate very well, it's just the smallest knob on the tripod when it should be one of the biggest, I guess I just like putting some force into the securing my base plates.
(4)